Example purposes only, not this design |
|
Our Study Set is one complete set of construction drawings. Use
the set to get very accurate bids from prospective builders or
your subcontractors. This set is the exact same set we
would send you if purchasing the design.
However, the set is stamped
"Illegal
to Build From - For Study Purposes
Only"
, does not include our
Construction License, and you
cannot legally build a home from the Study
Set.
The Study Set purchase
price is 100% applicable towards
the purchase of the construction
print(s) for this design.
The typical
Study Set includes but is not
limited to these pages:
Cover Page;
Each Design Basics home plan features the rendered elevation and informative
reference sections including: general notes and design criteria 1;
abbreviations; and symbols for your Design Basics' plan.
Elevations Page;
Drafted at 1/4" scale for the front and 1/8" scale
for the rear and sides. All elevations are detailed and an
aerial view of the
roof is provided, showing all hips, valleys and ridges.
Foundation Page;
Drafted at 1/4" scale. Poured or block basement or slab
foundations are standard. We also show the HVAC equipment,
structural information,
steel beam and pole locations and the direction and spacing
of the floor system above.
Main Level Floor Plan;
Drafted at 1/4" scale. Fully dimensioned from stud to stud for
ease of framing. 2"x4" walls are standard.
The detailed drawings include such things as structural
header locations, framing layout
and kitchen layout.1
Upper Level Floor Plan(s)
if applicable;
Drafted at 1/4" scale.
Dimensioned from stud
to stud and drafted
to the same degree of detail as the main level floor plan.1
Interior elevation and sections;
Useful for the cabinet and bidding process, this page shows all kitchen
and bathroom cabinets as well as any other cabinet elevations.
Electrical;
Illustrated on a separate page for clarity, the electrical
plan shows suggested electrical layout for the foundation,
main and second level
floor plans. Typical wall, cantilever, stair,
brick and fireplace sections are provided to further explain
construction.
Roof Framing Plan;
Illustrated on a separate page for clarity, the roof framing plan shows
the suggested dimensional plan showing lengths, runs, ridge heights
and wall plate heights.
1
Our plans are drafted to meet
average conditions and codes
in the state of Nebraska at
the time they were designed.
Because codes and requirements
can change, and may vary from
jurisdiction to jurisdiction,
Design Basics Inc. cannot warrant
compliance with any specific
code or regulation. All Design
Basics plans can be adapted
to your local building codes
and requirements. It is the
responsibility of the purchaser
and/or builder of each plan
to see that the structure is
built in strict compliance
with the governing municipal
codes (city, count, state and
federal).
|
